You may also like...
Click to Enlarge
The Esqueda Fountain is a elegant tall bowl type fountain that has a hewn stone look. It transforms any garden or patio space visually and by adding the tranquil sound of water into a home inside or outdoors. The fountain features a wonderfully textured surface and the terrific finish. Guaranteed outdoor durability. The Esqueda Fountain is available only in the Stone Ledge finish as shown. Finishes are hand applied and may vary making each piece unique.
No plumbing necessary. The Esqueda Fountain is self circulating and includes pump, all hardware and tubing required to properly asssemble the fountain with full step by step directions.
The Esqueda Fountain is a substantial and durable fountain that is hand cast and finished in the USA in fiber cememt. This innovative material convincingly replicates the look of lead, iron and concrete, but, is up to eighty percent lighter than traditional materials. Produced by a patented process this material is durable, non-flammable, and eco-friendly. Made from clay and other naturally found materials. Frost Resistant and U.V. Resistant. Naturally retained salts will ensure natural aging.
We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component..
12" x 14.75" H